Choose language
  1. Home
  2. Convert
  3. AIFF to MMF

Convert AIFF to MMF

Convert an AIFF clip into an MMF (SMAF) ringtone for older Yamaha-based mobile phones. The sound is mixed to mono and compressed to a small file.

Loading the tool…
Rate this tool
No ratings yet. Be the first.

How to use

  1. Step 1

    Load the AIFF

    Drop the .aiff or .aif clip you want on the phone.

  2. Step 2

    Pick a sample rate

    Use 22 kHz for the best sound, or 8 to 11 kHz for a smaller file.

  3. Step 3

    Save and transfer

    Download the .mmf and copy it to the phone.

From studio quality to phone ringtone

AIFF and MMF sit at opposite ends of the audio world. AIFF is uncompressed studio audio, often 24-bit. MMF, short for the Yamaha SMAF format, was designed for ringtones on 2000s feature phones with Yamaha sound chips, many of them made by Samsung. Musicians who made ringtones for those phones, collectors of old handsets, and people who still use a feature phone may need to convert AIFF to MMF.

What changes in the conversion

The audio is mixed from stereo to mono and encoded as 4-bit Yamaha ADPCM. The resolution drops dramatically compared with a 16 or 24-bit AIFF, and the sample rate goes down to 22 kHz or lower. On a small phone speaker the result sounds clear, but on studio monitors it will sound lo-fi.

File30 seconds takes
AIFF, 24-bit, 48 kHz stereoabout 8.6 MB
AIFF, 16-bit, 44.1 kHz stereoabout 5.3 MB
MMF, 22 kHz monoabout 330 KB
MMF, 8 kHz monoabout 120 KB

Prepare the clip for a tiny speaker

  • Keep it short: 15 to 30 seconds. Bounce or cut exactly the part you want, for example with Cut audio.
  • Check the mono mix. Wide stereo effects and instruments panned hard to one side can lose level or disappear when the channels are summed. The stereo panner can narrow the image before conversion.
  • Remove sub-bass with the equalizer. A feature phone speaker cannot reproduce it, and it only makes the ADPCM noise more obvious.
  • Bring the peak close to full scale. Quiet material gains more audible hiss in 4-bit ADPCM.

Getting it on the phone

Copy the MMF to the phone's memory card or send it via Bluetooth, then set it as the ringtone in the sound settings. Old phones often have a maximum size for ringtone files; if the 22 kHz version is refused, try 11 or 8 kHz. Markers and tags from the AIFF are not stored in MMF, so the file name is the ringtone name.

Frequently asked questions

Why does the MMF sound lo-fi compared with the AIFF?

MMF uses mono 4-bit ADPCM at a low sample rate. It was designed for small phone speakers, where the difference is hard to hear.

What length should the ringtone be?

15 to 30 seconds is ideal for older phones with limited memory.

My stereo effects disappeared. Why?

MMF is mono. Parts that relied on wide stereo can cancel out when the channels are mixed together. Narrow the stereo image before converting.

Which phones use MMF?

Feature phones with Yamaha sound chips from the 2000s, especially many Samsung models.

More tools