About the MMF ringtone format
SMAF, saved with the .mmf extension, is a mobile audio format developed by Yamaha. In the 2000s, many feature phones, especially Samsung handsets, used Yamaha sound chips that played SMAF natively. Ringtone websites of that era offered MMF downloads, and some phones could set only MMF or MIDI files as ringtones. People still look for MMF today to personalise an old phone that they keep as a backup, use abroad, or collect.
How the conversion works
The WAV is mixed down to mono and encoded as Yamaha ADPCM, a 4-bit compression that the phone chips can decode with very little power. You can choose the sample rate:
| Sample rate | Data rate | Size of 30 seconds | Sound |
|---|---|---|---|
| 8 kHz | 32 kbps | about 120 KB | like a telephone line |
| 11 kHz | 44 kbps | about 165 KB | clear voice, dull music |
| 22 kHz | 88 kbps | about 330 KB | good for music on a phone speaker |
A WAV of the same length takes about 5 MB, so even the highest setting is around fifteen times smaller. Older phones often limit ringtone size, so use 8 or 11 kHz if the 22 kHz file is not accepted.
Preparing the WAV
- Cut the clip to 15 to 30 seconds with Cut audio.
- Check that the stereo image is not important. Effects that rely on wide stereo, or a part that plays only on one side, can sound thin or disappear when mixed to mono.
- Bring the level up with normalize, because 4-bit ADPCM adds noise that is more audible in quiet passages.
- Cut very deep bass with the equalizer; the phone cannot play it, and removing it leaves more room for the melody.
Transfer to the phone
Copy the file to the phone's memory card or send it by Bluetooth, then open it from the phone's file manager or sound settings and set it as the ringtone. Some models only list ringtones from a specific folder, so look in the phone's manual. MMF stores no song tags, so the file name is what you will see.