Why WAV files need converting
WAV is raw, uncompressed audio. Recorders, cameras, music software and sample packs use it because it is simple and keeps every detail. The price is size: one minute of CD-quality stereo (16-bit, 44.1 kHz) takes about 10 MB, and a studio file at 24-bit and 48 kHz takes about 17 MB per minute. A one-hour interview recorded as WAV easily passes 600 MB, which is too large to email, slow to upload and heavy on a phone.
This WAV converter makes such files practical. It reads standard PCM WAV at 8, 16, 24 or 32 bits, including 32-bit float files from modern recorders and audio editors, and writes the format you choose.
Choose the right target format
- WAV to MP3 when you want a file that plays everywhere. At 192 kbps the file is about seven times smaller.
- WAV to FLAC when you want to keep every bit but save 40 to 60 percent of the space. Perfect for archives.
- WAV to M4A or WAV to AAC for Apple devices and good quality at modest bitrates.
- WAV to AIFF when Mac software asks for it. The sound stays identical.
- WAV to OPUS for voice recordings that must be tiny, and WAV to OGG for games and open-source software.
- WAV to WMA for older Windows players and car stereos.
- WAV to M4R and WAV to MMF for ringtones on iPhones and old mobile phones.
- WAV to MIDI to turn a clean instrument recording into notes, and WAV to MP4 to make a video with a picture.
WAV is the best starting point
Because WAV has not been compressed before, every conversion from it is a first-generation encode. That is the ideal case: an MP3 or AAC made from WAV sounds better than one made from another lossy file at the same bitrate. If you have both a WAV and an MP3 of the same recording, always convert from the WAV.
| Output | Setting | Size of 10 minutes |
|---|---|---|
| WAV source | 16-bit, 44.1 kHz stereo | about 100 MB |
| FLAC | lossless | about 50 to 60 MB |
| MP3 | 320 kbps | about 24 MB |
| MP3 or M4A | 192 kbps | about 14 MB |
| OPUS | 64 kbps | about 5 MB |
Batch conversion and settings
Drop a full session folder and convert it in one go. The same settings are used for every file:
- Bitrate for MP3, AAC, M4A, OGG, OPUS and WMA. Music sounds clean at 192 kbps or more; speech is fine at 64 to 96 kbps.
- Bit depth for FLAC and AIFF. Keep 24-bit if the WAV is 24-bit and you plan to edit later. Choose 16-bit for listening copies.
- Sample rate. Leave it as it is unless a device needs 44.1 or 48 kHz. Opus always uses 48 kHz.
- Channels. A mono microphone recording saved as stereo wastes space; converting it to mono halves the size of lossless output.
Tags and other things to know
WAV files rarely carry useful tags, so the converted file will usually have no title or artist. You can add them later in your music player. Cue points and loop markers stored in some WAV files are not carried over. If a WAV file will not open, it may use an unusual codec such as compressed ADPCM; the converter tries FFmpeg in that case, which handles most of them.
To cut silence or noise before converting, open the file in the audio editor or noise reduction tool first.